Menu
   

 

 


 

Use these products for weekly volumes of more than 100 cubic yards of uncompacted dry waste materials. Select model based on a "feed (clear top) opening" that will accommodate the largest items being processed.

The Tank is perfect for commercial applications where space is limited but the demand for maximum compaction performance isn't such as: grocery stores, warehouses, department stores, large restaurants, factories, and much more.

The overall length of 72" enables Mark-Costello's "TANK" to fit snugly against any structure.
The Tank's compaction power is at the top of the industry with 62,700 lbf and a ram face pressure of 40.2 psi!
Durable construction with 1/2" thick flooring and ram face.
Superior clear top openings: 53" x 58" (2.5 cy. models) and 41" x 58" (2 cy. models).
The compact size and 48" loading height eliminates the need for platforms with hand and toe rails.
The "TANK" also features the Signature Series Warranty: 3 Year Warranty on Structure, 2 Year Warranty on Components, and 6 Month Warranty on Labor
The "TANK" uses a remote power unit.

Mark-Costello's Tank - Trash Commander Series Compactor

Mark-Costello's Signature Series Warranty:
Signature Series Warranty
3 Year Warranty on Structure,
2 Year Warranty on Components, and
6 Month Warranty on Labor

The Trash Commander Difference

Mark-Costello's Trash Commander® Series is superior in design and function. These 2, 2.5 and 3 cubic yard capacity compactors are built tough with a heavy duty power frame and extraTrash Commander vrs Other Compactors steel where it counts. The compact size of the Trash Commander makes it ideal for dock applications. They take as much as 15% less space than other compactors of similar capacity. And the two cross-cylinders produce powerful compaction equal to larger body compactors.

Click on the model numbers below for detailed information on each unit including features & benefits and specifications:
 
Model
Charge Box
Capacity
Clear Top
Opening
TC-2 HD
2.0 cy.
41" x 60"
TC-2 HD/HF
2.0 cy.
41" x 60"
TC-2.5 HD
2.5 cy.
53" x 60"
TC-2.5 HD/HF
2.5 cy.
53" x 60"
TC-3 HD
3.0 cy.
67 1/2" x 60"
TC-3 HD/HF
3.0 cy.
67 1/2" x 60"
Tank Series
TC-220T HD
2.0 cy.
42" x 58"
TC-220T HD/HF
2.0 cy.
42" x 58"
TC-225T HD
2.5 cy.
53 1/2" x 58"
TC-225T HD/HF
2.5 cy.
53 1/2" x 58"

Features & Benefits:

Compact size makes it ideal for applications where space is limited such as a dock feed installation.
Mark-Costello's patented CYCON Life-Xtender®- cyclic control system eliminates troublesome limit and pressure control switches! CYCON produces superior payloads and reduces trash removal cost!
A tough heavy-duty power frame that includes 1/2" thick compaction chamber floor and ram face plate, liberal use of heavy hot-rolled channels, angles, and bars. The breaker bar is a 6"x8"x1" thick solid piece of hot-rolled angle steel.
A mobile power module, securely concealed, which can be relocated to either side of the compactor or converted to a remote power unit.
Ram guided system featuring graphite impregnated cast iron runners riding on replaceable wear strips. Less friction produces more efficient compaction and less floor wear.


 


Trash Commander Stationary compactors

Structural Dimensions

A B C D E F G H I J *K *L
101 3/4" 69" 48" 16" 45" 56 3/4" 78" 31 1/2" 38 1/2" 14 5/8" 74" 60 3/4"
2584 mm 1753 mm 1219 mm 406 mm 1143 mm 1442 mm 1981 mm 800 mm 978 mm 371 mm 1880 mm 1543 mm

* At Bolt Centers (reference dimensions only)
TC-2 HD
TC-2 HD/HF
Charge Box Capacity
(Mfrs. Rating) 2 cy 1.5m3 2 cy 1.5 m3
(WASTEC Rating) 1.57 cy 1.2m3 1.57 cy 1.2 m3
Clear Top Opening(LxW) 41"x60" 1715 x 1524 mm 41"x60" 1715 x 1524 mm
Capacity Per Hour 109 cy 83 m3 141 cy 108 m3
Performance Data
Cycle Time 52 sec 52 sec 40 sec 40 sec
Total Normal Force 54,500 lbs 243 kN 62,700 lbs. 279 kN
Normal Ram Face 31.3 psi 216 kPa 36.0 psi 248 kPa
Ram Penetration 14" 356 mm 14" 356mm
Electrical Equipment
Electrical Motor 3/60-208/230/460 10 hp 7.5 kw 15 hp 11 kw
Electrical Control Voltage 120 VAC 120 VAC 120 VAC 120 VAC
Typical Panel Box: UL Listed; NEMA Type 3R with Standard Controls: Keylock Start, Stop, Reverse
Hydraulic Equipment
Pump Capacity 10 gpm 38 l/m 13 gpm 49 l/m
Normal Pressure 2000 psi 138 bar 2300 psi 158 bar
Hydraulic Cylinder (2)

Bore

4 1/2" 114 mm 4 1/2" 114 mm

Rod

2 1/2" 63 mm 2 1/2" 63 mm
Structural Characteristics
Charge Box Sides 1/4" 6 mm 1/4" 6 mm
Charge Box Floor 1/2" 13 mm 1/2" 13 mm
Ram Face Plate 1/2" 13 mm 1/2" 13 mm
Ram Bottom 3/8" 10 mm 3/8" 10 mm
Ram Top 3/8" 10 mm 3/8" 10 mm
Breaker Bar - Structural Angle 6" x 8" x 1" 150x200x25 mm 6" x 8" x 1" 150x200x25 mm
WEIGHT 5,700 lbs. 2585 kg 5,700 lbs. 2585 kg

Pictures on this page are illustrative only. Specifications are subject to change without notice to accommodate improvements to the equipment. Certified in compliance with ANSI Regulation Z245.2, all OSHA standards, and certified under WASTEC's Stationary Compactor Certification Program. Products must be used with safe practice and in accordance with said regulations and standards.

Top of Page
 

 

Trash Commander Series Stationary Compactor


Structural Dimensions

A B C D E F G H I J *K *L
126" 69" 48" 16" 57" 69" 78" 31 1/2" 38 1/2" 14 5/8" 74" 75 1/4"
3200 mm 1753 mm 1219 mm 406 mm 1448 mm 1753 mm 1981 mm 800 mm 978 mm 371 mm 1880 mm 1911 mm

* At Bolt Centers (reference dimensions only)
TC-2.5 HD
TC-2.5 HD/HF
Charge Box Capacity
(Mfrs. Rating) 2.5 cy 1.9 m3 2.5 cy 1.9 m3
(WASTEC Rating) 2.01 cy 1.5 m3 2.01 cy 1.5 m3
Clear Top Opening(LxW) 53"x60" 1041 x 1524 mm 53"x60" 1041 x 1524 mm
Capacity Per Hour 115 cy 86 m3 148 cy 110m3
Performance Data
Cycle Time 63 sec 63 sec 49 sec 49 sec
Total Normal Force 54,500 lbs 243 kN 62,700 lbs. 279 kN
Normal Ram Face 31.3 psi 216 kPa 36.0 psi 248 kPa
Ram Penetration 14" 356 mm 14" 356mm
Electrical Equipment
Electrical Motor
3/60-208/230/460
10 hp 7.5 kw 15 hp 11 kw
Electrical Control Voltage 120 VAC 120 VAC 120 VAC 120 VAC
Typical Panel Box: UL Listed; NEMA Type 3R with Standard Controls: Keylock Start, Stop, Reverse UL Listed; NEMA Type 3R with Standard Controls: Keylock Start, Stop, Reverse
Hydraulic Equipment
Pump Capacity 10 gpm 38 l/m 13 gpm 49 l/m
Normal Pressure 2000 psi 138 bar 2300 psi 158 bar
Hydraulic Cylinders        

Cylinder Bore 2 @

4 1/2" 114 mm 4 1/2" 114 mm

Cylinder Rod 2 @

2 1/2" 63 mm 2 1/2" 63 mm
Structural Characteristics
Charge Box Sides 1/4" 6 mm 1/4" 6 mm
Charge Box Floor 1/2" 13 mm 1/2" 13 mm
Ram Face Plate 1/2" 13 mm 1/2" 13 mm
Ram Bottom 3/8" 10 mm 3/8" 10 mm
Ram Top 3/8" 10 mm 3/8" 10 mm
Breaker Bar - Structural Angle 6" x 8" x 1" 150x200x25 mm 6" x 8" x 1" 150x200x25 mm
Weight 4,500 lbs 2040 kg 4,500 lbs 2040 kg

Pictures on this page are illustrative only. Specifications are subject to change without notice to accommodate improvements to the equipment. Certified in compliance with ANSI Regulation Z245.2, all OSHA standards, and certified under WASTEC's Stationary Compactor Certification Program. Products must be used with safe practice and in accordance with said regulations and standards.

Top of Page
 

 


Trash Commander Series Stationary Compactor

Structural Dimensions

A B C D E F G H I J *K *L
154" 69" 48" 16" 71 1/2" 82 1/2" 80" 31 1/2" 38 1/2" 14 5/8" 74" 69 1/4"
3912 mm 3912 mm 1219 mm 406 mm 1816 mm 2096 mm 2032 mm 800 mm 978 mm 371 mm 1880 mm 1759 mm

* At Bolt Centers (reference dimensions only)
TC-3 HD
TC-3 HD/HF
Charge Box Capacity
(Mfrs. Rating) 3 cy 2.2m3 3 cy 2.2m3
(WASTEC Rating) 2.55 cy 1.9m3 2.55 cy 1.9m3
Clear Top Opening(LxW) 67 1/2"x60" 1346 x 1524mm 67 1/2"x60" 1346 x 1524mm
Capacity Per Hour 119 cy 89m3 119 cy 89m3
Performance Data
Cycle Time 77 sec 77 sec 59 sec 59 sec
Total Normal Force 54,500 lbs 243 kN 62,700 lbs. 279 kN
Normal Ram Face 31.3 psi 216 kPa 36.0 psi 248 kPa
Ram Penetration 13" 330mm 13" 330mm
Electrical Equipment
Electrical Motor 3/60-208/230/460 10 hp 7.5 kw 15 hp 11 kw
Electrical Control Voltage 120 VAC 120 VAC 120 VAC 120 VAC
Typical Panel Box: UL Listed; NEMA Type 3R with Standard Controls: Keylock Start, Stop, Reverse UL Listed; NEMA Type 3R with Standard Controls: Keylock Start, Stop, Reverse
Hydraulic Equipment
Pump Capacity 10 gpm 38 l/m 13 gpm 49 l/m
Normal Pressure 2000 psi 13.8 mPa 2300 psi 15.8 mPa
Hydraulic Cylinders

Cylinder Bore 2 @

4 1/2" 114 mm 4 1/2" 114 mm

Cylinder Rod 2 @

2 1/2" 63 mm 2 1/2" 63 mm
Structural Characteristics
Charge Box Sides 1/4" 6 mm 1/4" 6 mm
Charge Box Floor 1/2" 13 mm 1/2" 13 mm
Ram Face Plate 1/2" 13 mm 1/2" 13 mm
Ram Bottom 3/8" 10 mm 3/8" 10 mm
Ram Top 3/8" 10 mm 3/8" 10 mm
Breaker Bar - Structural Angle 6" x 8" x 1" 150x200x25 mm 6" x 8" x 1" 150x200x25 mm
Weight 5,000 lbs. 2268 kg 5,000 lbs. 2268 kg

Pictures on this page are illustrative only. Specifications are subject to change without notice to accommodate improvements to the equipment. Certified in compliance with ANSI Regulation Z245.2, all OSHA standards, and certified under WASTEC's Stationary Compactor Certification Program. Products must be used with safe practice and in accordance with said regulations and standards.

 

Top of Page


THE MARK-COSTELLO CO.
15351 Texaco Avenue
Paramount, Ca. 90723
(562) 630-7950 Phone  | (562) 630-7960 FAX
Contact Us

All content Copyright  © 2011-2015 All rights reserved.  Sitemap | Terms of Use | Privacy Policy | Links

Last Updated Friday, June 12, 2015 | Web Services by Ron Castle Webs