STEALTH® Baler
The STEALTH® Baler is the most affordable horizontal baler for OCC on the market.
The Stealth Baler is specially designed for baling corrugated cardboard. It is capable of baling 2-3 tons per hour.
Mark-Costello also manufactures a full-line of Conveyors and Material Reduction Equipment.
Some of the Features and Benefits:
- With its large 46″ x 60″ feed opening, you can produce bales that weigh more than 1600 pounds (OCC).
- Through the Door or Sides Tie-Off
- Self-Contained Power Unit
- Start-up Alarm.
- Electrical Disconnect
- Optional Features: Photocell controls, bale made alarm, chute feed hopper, conveyor controls, oil heater.
- Manual Controls
- Lower photocell control
Structural Dimensions
Overall Dimensions |
255″ L x 83″ W x 92″ H (hopper) |
Hopper Type |
Hand Feed |
Feed Opening |
46″ L x 60″ W |
Feed Height |
70″ |
Baler Weight (approx.) |
11,300 lbs. |
Hydraulics
Cylinder Size |
6″ bore X 4″ rod |
Cylinder Stroke |
82″ |
Pump Flow |
18.5 GPM |
Reservoir |
30 gal. |
Maximum Pressure |
2400 psi |
Electrical
Motor Size |
20 hp |
Main Voltage |
460 VAC, 3 phase |
Control Voltage |
120 VAC |
Control Panel |
UL Listed |
Performance Data
Cycle Time |
50 sec. |
Maximum Force |
67,900 lbf. |
Ram Face Pressure |
43 psi |
Output
Bale Size |
42″ x 48″ x 60″ |
Bale Weight |
1600 lbs.+ (OCC) |
Throughput |
2-3 tons/hr. |